T7 Mount – One-Piece Mount with ERA Grip

With the T7 mount, ERATAC presents a groundbreaking new design concept. The innovative inlays with ERA Grip technology, developed specifically for this application, ensure an absolutely secure hold of the riflescope – even under extreme recoil. Installation requires no bonding or adhesives, and high tightening torques are no longer necessary. The belt-style clamping principle with hinged ring caps is significantly gentler on the riflescope, especially on models with thin main tubes.

All torque settings are clearly and permanently laser engraved. An additional marking on the clamping jaws allows quick verification of the tightening torque, even when no torque wrench is available. There are no protruding parts along the entire mount, so snagging on equipment is eliminated and weapons with a top charging handle can be operated without restriction.

Tested with the highest rates of fire and the largest calibers under the most extreme conditions.

  • ERA Grip technology for an absolutely secure hold of the riflescope
  • Weight reduction of up to 40% compared to comparable products
  • Each ring with four self-centering interfaces (9, 12, 3 o’clock and 45°)
  • Hinged ring caps for easier and more scope-friendly installation
  • Multiple ramps for aligning the riflescope using an alignment tool
T7 Mount flyerPDF · 5 pages · 5.3 MBView PDF
ERATAC T7 Montage – verlängerte Ausführung

Short or extended – the versions compared

ERATAC T7 Mount – short versionShort versionItem no. T7013 · T7014 · T7016
ERATAC T7 Mount – extended versionExtended versionItem no. T7023 · T7024 · T7026
Tube Ø
30 · 34 · 36 mm
30 · 34 · 36 mm
Height H
13 – 33 mm
20 – 35 mm
Centerline height AH
30 – 48 mm
38 – 48 mm
Inclination
none or 20 MOA
none or 20 MOA
Dimensions A / B
127 / 73 mm
122 / 68 mm
Dimension G
–
65 mm
Weight
179 – 227 g
203 – 229 g
Variants
12
10
Dimensions short
Dimensions extended

Differences are shown in bold with a gold line. Values apply across all variants of each version; see dimensional drawing in the flyer.

T7 Mount - short version

ø H AH MOA G A B F Item no. Weight
mm mm mm mm mm mm mm g
30 15 30 – – 127 73 9.3 T7013-0015 179
23 38 – – 127 73 11 T7013-0023 195
17 30 20 – 127 73 11.3 T7013-2017 184
25 38 20 – 127 73 13 T7013-2025 199
34 13 30 – – 127 73 7.3 T7014-0013 182
21 38 – – 127 73 11 T7014-0021 201
31 48 – – 127 73 11 T7014-0031 224
15 30 20 – 127 73 9.3 T7014-2015 188
23 38 20 – 127 73 11 T7014-2023 207
33 48 20 – 127 73 11 T7014-2033 227
36 20 38 – – 127 73 11 T7016-0020 209
22 38 20 – 127 73 11 T7016-2022 209

ø = tube diameter · H = height · AH = centerline height · MOA = inclination
All models: A = 127 mm, B = 73 mm. See dimensional drawing in the flyer.

ERATAC T7 Montage - kurze und verlängerte Ausführung im Vergleich

T7 Mount - extended version

ø H AH MOA G A B F Item no. Weight
mm mm mm mm mm mm mm g
30 23 38 – 65 122 68 11 T7023-0023 203
33 48 – 65 122 68 16.5 T7023-0033 215
25 38 20 65 122 68 11 T7023-2025 208
35 48 20 65 122 68 16.5 T7023-2035 220
34 21 38 – 65 122 68 9 T7024-0021 212
31 48 – 65 122 68 14.5 T7024-0031 224
23 38 20 65 122 68 9 T7024-2023 217
33 48 20 65 122 68 14.5 T7024-2033 229
36 20 38 – 65 122 68 8 T7026-0020 218
22 38 20 65 122 68 8 T7026-2022 222

ø = tube diameter · H = height · AH = centerline height · MOA = inclination
All models: G = 65 mm, A = 122 mm, B = 68 mm. See dimensional drawing in the flyer.

Adapters for T7 Mounts

Description Item no. L mm H mm Weight g
T7 Picatinny adapter, centric T0905-1008 55 8 16
T7 adapter for laser rangefinders, H 25 T0910-1025 120.5 25 57
T7 adapter for laser rangefinders, H 35 T0910-1035 120.5 35 68
T7 adapter for Aimpoint ACRO / Steiner MPS T0981-1005 47 7.7 18
T7 adapter for Aimpoint COA T0921-1008 58.5 8.4 32
T7 adapter with UNIVERSAL interface, lower 45° position T0960-1005 25 – 24
T7 adapter with UNIVERSAL interface, upper 45° position T0960-1105 25 – 16
T7 adapter for Aimpoint ACRO / Steiner MPS, upper 45° position T0981-1000 47 – 22
ERATAC T7 Picatinny adapter, centric – T0905-1008

T7 Picatinny adapter, centricT0905-1008L 55 mm · H 8 mm · 16 g

ERATAC T7 adapter for laser rangefinders, H 25 – T0910-1025

T7 adapter for laser rangefinders, H 25T0910-1025L 120.5 mm · H 25 mm · 57 g

ERATAC T7 adapter for laser rangefinders, H 35 – T0910-1035

T7 adapter for laser rangefinders, H 35T0910-1035L 120.5 mm · H 35 mm · 68 g

ERATAC T7 adapter for Aimpoint ACRO / Steiner MPS – T0981-1005

T7 adapter for Aimpoint ACRO / Steiner MPST0981-1005L 47 mm · H 7.7 mm · 18 gFor mounting Aimpoint ACRO and Steiner MPS. Mounted on the T0960-1005 adapter, the red dot sight sits in the lower 45° position – for quick target acquisition by tilting the rifle 45°.

ERATAC T7 adapter for Aimpoint COA – T0921-1008

T7 adapter for Aimpoint COAT0921-1008L 58.5 mm · H 8.4 mm · 32 gFor centric mounting of an Aimpoint COA on the T7 mount.

ERATAC T7 adapter with UNIVERSAL interface, lower 45° position – T0960-1005

T7 adapter with UNIVERSAL interface, lower 45° positionT0960-1005L 25 mm · 24 gFor mounting red dot sights at the lower 45° position – for quick target acquisition in dynamic disciplines such as IPSC Rifle.

ERATAC T7 adapter with UNIVERSAL interface, upper 45° position – T0960-1105

T7 adapter with UNIVERSAL interface, upper 45° positionT0960-1105L 25 mm · 16 gFor mounting red dot sights at the upper 45° position. The red dot sight sits far to the side, so a laser rangefinder can be used at the 12 o’clock position. Same function as the T0981-1000, with additional options for a wide variety of attachments.

ERATAC T7 adapter for Aimpoint ACRO / Steiner MPS, upper 45° position – T0981-1000

T7 adapter for Aimpoint ACRO / Steiner MPS, upper 45° positionT0981-1000L 47 mm · 22 gFor mounting Aimpoint ACRO or Steiner MPS at the upper 45° position. The red dot sight sits far to the side, so a laser rangefinder can be used at the 12 o’clock position – the control buttons remain freely accessible.

Coming soon:

  • Centric adapter for Trijicon RMR
  • Spacer H 6.0 mm / H 12.0 mm
  • Bubble level
  • Adapter for Angle Cosine Indicator
  • Adapter for SG Pulse

Important: The new interfaces are not compatible with the attachments of the T4/T5 series.
Distribution outside the USA only.

Videos

ERATAC T7 MountRequest the right T7 MountAlready know which version you need, or have questions about mount height and tube diameter? Write to us directly – with details on your scope and rifle, we can answer your request precisely.

Send request +49 9721 94810-0info@recknagel.de